Page 1 of 1

Non-skid Replacement Suggestions

Posted: Mon Sep 04, 2017 4:49 pm
by pmcnealy
My non-skid needs to be re-done, and I don't r4allt want to spend the 2K to have someone do it (or the 3K for Seadek). Has anybody had success rolling rolling own non-skid with something like Kiwigrip?

Re: Non-skid Replacement Suggestions

Posted: Sat Nov 18, 2017 9:47 pm
by pmcnealy
Ok, so after a ton of research I have decided to do the non-skid myself. At the recommendation of a friend, I am using Tuff Coat.

As You can see in the pictures below, I have already taped everything off. Now, that is only so I can sand it, however all I have to do is scuff it. The bummer is that once I sand it I have to retype everything before I can roll the tough coat. I'll post pics to let you know how it's going.
20171118_163816-600x800.jpg
20171118_163816-600x800.jpg (130.28 KiB) Viewed 470 times
20171118_163836-600x800.jpg
20171118_163836-600x800.jpg (124.05 KiB) Viewed 470 times

Re: Non-skid Replacement Suggestions

Posted: Mon Nov 20, 2017 3:34 pm
by Slough
Good dill

Re: Non-skid Replacement Suggestions

Posted: Sun Dec 17, 2017 6:36 pm
by pmcnealy
FB_IMG_1513535471718-540x720.jpg
FB_IMG_1513535471718-540x720.jpg (87.6 KiB) Viewed 386 times
FB_IMG_1513535464333-540x720.jpg
FB_IMG_1513535464333-540x720.jpg (92.44 KiB) Viewed 386 times
FB_IMG_1513535471718-540x720.jpg
FB_IMG_1513535471718-540x720.jpg (87.6 KiB) Viewed 386 times
Operation Non-skid complete! Finally!!! :D

Re: Non-skid Replacement Suggestions

Posted: Mon Dec 18, 2017 10:56 pm
by Slough
Looks good

Re: Non-skid Replacement Suggestions

Posted: Thu Dec 21, 2017 12:24 pm
by jmike
Very nice.... now your giving me ideas.

Re: Non-skid Replacement Suggestions

Posted: Thu Dec 21, 2017 4:50 pm
by pmcnealy
Very nice.... now your giving me ideas.
Fank's! It was really easy to do, just a lot of work.